CAEN | Products | Power Supplies | SY1527 / SY2527 / SY3527 Universal Multichannel System | SY1527 - SY2527 - SY3527 HV Floating Power Supply Boards

> CAEN > Electronic Instrumentation > Products > Power Supplies > SY1527 / SY2527 / SY3527 Universal Multichannel System > SY1527 - SY2527 - SY3527 HV Floating Power Supply Boards >

Products

Support

Custom Projects

	SY1527 / SY2527 / SY3527 Universal Multichannel System - A1535S

	24 Ch. 3.5 kV/3 mA Comm.Floating RTN Board/SHV Conn.	New

	Company Network Sales Network Contact us Newsletter Area

Highlights

Channels with common floating return
Available with either positive or negative polarity
0 ÷ 3.5 kV output voltage
3 mA current full scale, with 500 nA resolution
500 mV Voltage Set/Monitor resolution
Voltage ripple smaller than <20 mVpp (typical)
Programmable TRIP parameter
Current generator operation in Overcurrent condition
SHV coaxial connectors

Products


	Power Supplies

SY1527 / SY2527 / SY3527 Universal Multichannel System

SY1527 - SY2527 - SY3527 HV Floating Power Supply Boards

A1535S

Printable Data-Sheet

Products Catalogues / Brochures

A1535S - 24 Ch. 3.5 kV/3 mA Comm.Floating RTN Board/SHV Conn.

Send this page

The Mod. A1535S is a double width (10TE wide) board housing 24 HV channels, available with either positive or negative polarity; Mod. A1535SM has 12 HV negative and 12 HV positive channels. The channels share a common floating return, which allows on-detector grounding reducing the noise level; the floating return is insulated from the crate earth up to ±50 V (with a 65 V hardware limit).
The output voltage range is 0 ÷ 3.5 kV, with 3 mA maximum output current and 0.5 V set and monitor resolution. The boards is provided with both current and voltage protections. If over-current occurs, the relevant channel can be programmed either to turn off after a programmable trip time or to keep on providing the maximum allowed current: this particular feature allows the modules to work as current generator. The maximum output voltage can be fixed, through a potentiometer located on the front panel, at the same common value for all the board channels and this value can be read out via software.
The board channels can be enabled according to the interlock logic.
The HV RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the 1 ÷ 500 V/s range (1 V/s step).

Polarity	A1535SM: CH0..11: Positive, CH12..23: Negative A1535SN: Negative A1535SP: Positive
Output Voltage	0÷3.5 kV
Max. Output Current	3 mA
Voltage Set/Monitor Resolution	500 mV
Current Set/Monitor Resolution	500 nA
VMAX hardware	0÷3.5 kV common for all the board channels
VMAX hardware accuracy	± 2% of FSR
VMAX software	0÷3.5 kV settable for each channel
VMAX software resolution	1 V
Ramp Up/Down	1÷500 Volt/sec, 1 Volt/sec step
Voltage Ripple	< 20 mV typical; max 30mV
Voltage Monitor vs. Output Voltage Accuracy	typical: ± 0.3% ± 0.5 V max: ± 0.3% ± 2 V
Voltage Set vs. Voltage Monitor Accuracy	typical: ± 0.3% ± 0.5 V max: ± 0.3% ± 2 V
Current Monitor vs. Output Current Accuracy	typical: ± 2% ± 1 µA max: ± 2% ± 5 µA
Current Set vs. Current Monitor Accuracy	typical: ± 3% ± 1 µA max: ± 3% ± 5 µA
Maximum output power	8 W per channel (software safety limit)
Power consumption	310 W @ full power

Description	Last Update
A1535S_REV3.pdf	14.01.2010
Precautions_for_Handling_Storage.pdf	04.01.2008

Name	Last Update
A1535S User Manual	14.01.2010

Code	Description
WA1535SXPAAA	A1535SP - SY1527 H.V. channels +3.5 KV 3 mA - SHVcommon floating (24 ch)
WA1535SXAAAA	A1535SN - SY1527 H.V. channels -3.5 KV 3 mA - SHVcommon floating (24 ch)
WA1535SMXAAA	A1535SM - SY1527 H.V. channels +3.5 KV 3 mA (12 ch) and -3.5 KV 3 mA (12 ch) - SHV common floating


© 2000 - 2010 CAEN S.p.A. All rights reserved.

> Electronic Instrumentation > Products \| Support \| Custom Projects CAEN S.p.A. - PI 00864500467 \| Privacy Policy	Quality Certification