 |
 |
VME Power Supplies - V6519 |
|
|
|
 |
|
|
VME Programmable HV Power Supply (6 ch., 500 V, 3 mA) |
Coming Soon |
|
|
|
|
|
| Tentative Data |
|
- Common floating return
- Fixed Polarity (positive or negative)
- 16 bit Resolution both on V and I
- Accuracy : 0.01% Measure ± 0.02% of Full Scale Range
- 30ppm/°C Stability
- Ripple smaller than 10mVpp (10 Hz ÷ 15 MHz)
- Live insertion/extraction capability
- Status output
- Interlock logic for board enable
- Individual channel enable
- Optional x10 Imon-Zoom available
|
|
|
|
|
|
|
|
Overview |
|
The V6519 is a 1-unit wide VME 6U module housing 8 High Voltage Power Supply Channels (500V, 3mA). The board is available with either positive or negative output polarity; mixed version with 3 positive and 3 negative channels is also available. The channels share a common floating return, which allows on-detector grounding reducing the noise level. HV outputs are delivered through SHV connectors.
The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the 1÷ 50 V/s range with 1 V/s steps.
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage differs from the programmed value
• Programmable via trimmer HVMAX hardware protection limit
• OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
• Channels can be enabled or disabled through the Interlock logic.
The modules fit into both VME/VME64 standard and V430 crates. Functional parameters can be programmed and monitored via VMEBus
|
|
|
| © 2000 - 2010 CAEN S.p.A. All rights reserved. |
|
|
|
